proper mesh wanted

Post Reply
User avatar
maaka
udonmap.com
Posts: 2852
Joined: October 9, 2007, 6:03 am

proper mesh wanted

Post by maaka » November 9, 2018, 12:54 pm

I have builders building a man cave, and every time I ask for proper 1/4 " (I think ) construction type mesh for my concrete, all I get is some chicken coop stuff that would hold a goat..where can I get proper mesh of the non bendy type, Phen or Phon Prisai would be nice, Udon it might be..thanks



Sport
udonmap.com
Posts: 1215
Joined: October 30, 2006, 10:13 pm
Location: LA USA
Contact:

Re: proper mesh wanted

Post by Sport » November 9, 2018, 1:21 pm

Maaka, I tried too buy mesh to do a maori hangi in Feb this year. Ventured to Global House on ring road and Khon Kaen Hwy, Thai Watsadu, Home Pro and half a dozen steel shops and could not find any. So unless they have had a supply, you could be wasting your time at those outlets.

G House did have it a few years ago. Good luck with your search and let us all know how you got along.

dunroaming
udonmap.com
Posts: 816
Joined: July 14, 2009, 1:34 pm

Re: proper mesh wanted

Post by dunroaming » November 9, 2018, 2:18 pm

Why not use 6mm rebar not expensive and readily available, bolt crops are 250 baht and tie wire 30 or 40 baht a roll job done

User avatar
parrot
udonmap.com
Posts: 9188
Joined: March 19, 2006, 8:32 pm

Re: proper mesh wanted

Post by parrot » November 9, 2018, 2:28 pm

This company is a very large wire mesh company on the Udon-Sakhon Hwy.
https://www.facebook.com/Thawornwirenetting

User avatar
kopkei
udonmap.com
Posts: 1450
Joined: August 27, 2010, 6:55 am

Re: proper mesh wanted

Post by kopkei » November 9, 2018, 3:02 pm

if it is something like this you are looking for?..
DSC00928 (Copy).JPG
DSC00927 (Copy).JPG
sorry not full mesh anymore , they have them at global house and other build shops in different sizes all according to their stock though ? ..must go look in the back stock of global house .... ;)

User avatar
vincemunday
udonmap.com
Posts: 2005
Joined: December 11, 2014, 11:36 pm
Location: Udon Thani ex North Stifford and Ramsgate
Contact:

Re: proper mesh wanted

Post by vincemunday » November 9, 2018, 3:10 pm

The top mesh kopkei is showing is available in Thai Watsadu in 8 x 4 sheets, I used it recently as a base to render a wall, it's very strong and quite sharp so use gloves, the galvanisation will prevent rust.
"I don't risk my life for the sake of my children, I risk it for the sake of everyone's children" Stephen Yaxley-Lennon aka Tommy Robison - Free speech activist 2017

User avatar
TAXIfor7/11
udonmap.com
Posts: 901
Joined: March 19, 2017, 2:08 pm

Re: proper mesh wanted

Post by TAXIfor7/11 » November 9, 2018, 4:21 pm

vincemunday wrote:
November 9, 2018, 3:10 pm
The top mesh kopkei is showing is available in Thai Watsadu in 8 x 4 sheets, I used it recently as a base to render a wall, it's very strong and quite sharp so use gloves, the galvanisation will prevent rust.
Also at do-home,different sizes/ examples on wall as you go in

User avatar
maaka
udonmap.com
Posts: 2852
Joined: October 9, 2007, 6:03 am

Re: proper mesh wanted

Post by maaka » November 9, 2018, 4:24 pm

thanks chaps for the input and ideas, Keep em coming..
How did the hangi go Sport?

User avatar
maaka
udonmap.com
Posts: 2852
Joined: October 9, 2007, 6:03 am

Re: proper mesh wanted

Post by maaka » November 9, 2018, 4:26 pm

darn, and I was just at Do Home / No Have the other day..

bluejets
udonmap.com
Posts: 798
Joined: March 17, 2008, 10:05 am
Location: Australia

Re: proper mesh wanted

Post by bluejets » November 10, 2018, 7:09 am

This mob might be able to steer you towards a local supplier.....

http://www.vconthai.com/wire-mesh/
Attachments
wire-mesh-other.jpg

User avatar
maaka
udonmap.com
Posts: 2852
Joined: October 9, 2007, 6:03 am

Re: proper mesh wanted

Post by maaka » November 11, 2018, 6:09 am

Wonderful fella's...it was a matter of printing out a copy of the picture, and showing it to my builder, for him to say ' You want . Can Can. Is ok can take back other wire and change, no problem '

pictures are worth a 1000 words nei
thanks guys..I am sure other will use the links provided '

User avatar
saint
udonmap.com
Posts: 2830
Joined: February 28, 2008, 5:31 pm
Location: the truth is out there . but dont dare tell it !!!!

Re: proper mesh wanted

Post by saint » November 11, 2018, 6:15 am

Also available out the back at global house.

bluejets
udonmap.com
Posts: 798
Joined: March 17, 2008, 10:05 am
Location: Australia

Re: proper mesh wanted

Post by bluejets » November 12, 2018, 4:36 pm

maaka wrote:
November 11, 2018, 6:09 am
Wonderful fella's...it was a matter of printing out a copy of the picture, and showing it to my builder, for him to say ' You want . Can Can. Is ok can take back other wire and change, no problem '

pictures are worth a 1000 words nei
thanks guys..I am sure other will use the links provided '
Don't know how many times I tried going down to local hardware suppliers in Si ChomPhu trying to get basic stuff.
Found by downloading a photo on the phone works every time. Still get the "no have" now and then but at least on the right track.

I did on one earlier occasion, take with me a drill bit that had bent almost at right angles, as an example of what I needed for a new one.
Received some funny looks and brother-in-law said they only sell "straight" ones.

User avatar
kopkei
udonmap.com
Posts: 1450
Joined: August 27, 2010, 6:55 am

Re: proper mesh wanted

Post by kopkei » November 13, 2018, 6:16 am

https://www.onestockhome.com/en/categor ... s/wiremesh
a website with a lot of building materials + photo ....good luck searching to all.... ;)

Post Reply

Return to “I'm Looking For....”