proper mesh wanted

Post Reply
User avatar
maaka
udonmap.com
Posts: 2771
Joined: October 9, 2007, 6:03 am

proper mesh wanted

Post by maaka » November 9, 2018, 12:54 pm

I have builders building a man cave, and every time I ask for proper 1/4 " (I think ) construction type mesh for my concrete, all I get is some chicken coop stuff that would hold a goat..where can I get proper mesh of the non bendy type, Phen or Phon Prisai would be nice, Udon it might be..thanks

Sport
udonmap.com
Posts: 1157
Joined: October 30, 2006, 10:13 pm
Location: LA USA
Contact:

Re: proper mesh wanted

Post by Sport » November 9, 2018, 1:21 pm

Maaka, I tried too buy mesh to do a maori hangi in Feb this year. Ventured to Global House on ring road and Khon Kaen Hwy, Thai Watsadu, Home Pro and half a dozen steel shops and could not find any. So unless they have had a supply, you could be wasting your time at those outlets.

G House did have it a few years ago. Good luck with your search and let us all know how you got along.

dunroaming
udonmap.com
Posts: 268
Joined: July 14, 2009, 1:34 pm

Re: proper mesh wanted

Post by dunroaming » November 9, 2018, 2:18 pm

Why not use 6mm rebar not expensive and readily available, bolt crops are 250 baht and tie wire 30 or 40 baht a roll job done

User avatar
parrot
udonmap.com
Posts: 8549
Joined: March 19, 2006, 8:32 pm

Re: proper mesh wanted

Post by parrot » November 9, 2018, 2:28 pm

This company is a very large wire mesh company on the Udon-Sakhon Hwy.
https://www.facebook.com/Thawornwirenetting

User avatar
kopkei
udonmap.com
Posts: 1215
Joined: August 27, 2010, 6:55 am

Re: proper mesh wanted

Post by kopkei » November 9, 2018, 3:02 pm

if it is something like this you are looking for?..
DSC00928 (Copy).JPG
DSC00927 (Copy).JPG
sorry not full mesh anymore , they have them at global house and other build shops in different sizes all according to their stock though ? ..must go look in the back stock of global house .... ;)

User avatar
vincemunday
udonmap.com
Posts: 1733
Joined: December 11, 2014, 11:36 pm
Location: Udon Thani ex North Stifford and Ramsgate
Contact:

Re: proper mesh wanted

Post by vincemunday » November 9, 2018, 3:10 pm

The top mesh kopkei is showing is available in Thai Watsadu in 8 x 4 sheets, I used it recently as a base to render a wall, it's very strong and quite sharp so use gloves, the galvanisation will prevent rust.
They shall not grow old, as we that are left grow old, age shall not weary them, not the years condemn. At the going down of the sun and in the morning, we will remember them.

User avatar
TAXIfor7/11
udonmap.com
Posts: 615
Joined: March 19, 2017, 2:08 pm

Re: proper mesh wanted

Post by TAXIfor7/11 » November 9, 2018, 4:21 pm

vincemunday wrote:
November 9, 2018, 3:10 pm
The top mesh kopkei is showing is available in Thai Watsadu in 8 x 4 sheets, I used it recently as a base to render a wall, it's very strong and quite sharp so use gloves, the galvanisation will prevent rust.
Also at do-home,different sizes/ examples on wall as you go in

User avatar
maaka
udonmap.com
Posts: 2771
Joined: October 9, 2007, 6:03 am

Re: proper mesh wanted

Post by maaka » November 9, 2018, 4:24 pm

thanks chaps for the input and ideas, Keep em coming..
How did the hangi go Sport?

User avatar
maaka
udonmap.com
Posts: 2771
Joined: October 9, 2007, 6:03 am

Re: proper mesh wanted

Post by maaka » November 9, 2018, 4:26 pm

darn, and I was just at Do Home / No Have the other day..

bluejets
udonmap.com
Posts: 686
Joined: March 17, 2008, 10:05 am
Location: Australia

Re: proper mesh wanted

Post by bluejets » November 10, 2018, 7:09 am

This mob might be able to steer you towards a local supplier.....

http://www.vconthai.com/wire-mesh/
Attachments
wire-mesh-other.jpg

User avatar
maaka
udonmap.com
Posts: 2771
Joined: October 9, 2007, 6:03 am

Re: proper mesh wanted

Post by maaka » November 11, 2018, 6:09 am

Wonderful fella's...it was a matter of printing out a copy of the picture, and showing it to my builder, for him to say ' You want . Can Can. Is ok can take back other wire and change, no problem '

pictures are worth a 1000 words nei
thanks guys..I am sure other will use the links provided '

User avatar
saint
udonmap.com
Posts: 2151
Joined: February 28, 2008, 5:31 pm
Location: the truth is out there . but dont dare tell it !!!!

Re: proper mesh wanted

Post by saint » November 11, 2018, 6:15 am

Also available out the back at global house.

bluejets
udonmap.com
Posts: 686
Joined: March 17, 2008, 10:05 am
Location: Australia

Re: proper mesh wanted

Post by bluejets » November 12, 2018, 4:36 pm

maaka wrote:
November 11, 2018, 6:09 am
Wonderful fella's...it was a matter of printing out a copy of the picture, and showing it to my builder, for him to say ' You want . Can Can. Is ok can take back other wire and change, no problem '

pictures are worth a 1000 words nei
thanks guys..I am sure other will use the links provided '
Don't know how many times I tried going down to local hardware suppliers in Si ChomPhu trying to get basic stuff.
Found by downloading a photo on the phone works every time. Still get the "no have" now and then but at least on the right track.

I did on one earlier occasion, take with me a drill bit that had bent almost at right angles, as an example of what I needed for a new one.
Received some funny looks and brother-in-law said they only sell "straight" ones.

User avatar
kopkei
udonmap.com
Posts: 1215
Joined: August 27, 2010, 6:55 am

Re: proper mesh wanted

Post by kopkei » November 13, 2018, 6:16 am

https://www.onestockhome.com/en/categor ... s/wiremesh
a website with a lot of building materials + photo ....good luck searching to all.... ;)

Post Reply

Return to “I'm Looking For....”

Who is online

Users browsing this forum: No registered users and 1 guest